Neuspeed 25.02.19.9 Manual de usuario descargar pdf

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com

7/8” (22mm) REAR ANTI-ROLL BAR

FITS VW GOLF IV R32

PART # 25.10.22.8

INSTALLATION INSTRUCTIONS

PARTS LIST: 1 – ANTI-ROLL BAR 1 – PKG. SILICONE GREASE

2 – BUSHINGS 2 – M10 NYLOC NUTS

TOOLS REQUIRED: 1 – RATCHET 1 – 17mm WRENCH

1 – 6” EXTENSION 1 – SMALL SCREWDRIVER

1 – 13mm SOCKET 1 – TORQUE WRENCH

1 – 16mm WRENCH

1. Park car on a flat, level surface capable of supporting the vehicle’s weight on jack and jack stands.

2. Using the manufacturers recommended lifting

point(s), raise rear of vehicle and support with jack

stands. NEVER WORK ON A VEHICLE

SUPPORTED ONLY WITH A JACK!

3. Loosen exhaust clamp (17mm Hex) and disconnect

exhaust from catalyst. Disconnect left and right exhaust

hangars and vacuum hose from diaphragm.

4. Remove exhaust from vehicle.

5. Using a small screwdriver, remove fasteners

securing heat shield and remove heat shield.

1 2

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX Visit us on the web…http://www.neuspeed.com & http://www.aps

Sin comentarios

Neuspeed 25.02.19.9 Manual de usuario