Neuspeed 25.02.19.4 Manual de usuario descargar pdf

19mm ADJUSTABLE REAR SWAY BAR

1996 – 2001 AUDI A4 / S4 QUATTRO

PART # 25.02.19.4

INSTALLATION INSTRUCTIONS

PART LIST: 1 – SWAY BAR 1 – RIGHT HAND BRACE

2 – POLYURETHANE BUSHINGS 2 – M10 NYLOC NUTS

1 – LEFT HAND SUPPORT BRACKET 10 – M8 FLANGE BOLT

1 – RIGHT HAND SUPPORT BRACKET 10 – M8 NYLOC NUT

1 – LEFT HAND BRACE 6 – M8 WASHER

TOOLS REQ: 1 – RATCHET 1 – 17mm WRENCH

1 – 12mm SOCKET 1 – 13mm WRENCH

1 – 13mm SOCKET

Left hand (driver’s) side shown.

In order to achieve the correct fit, please follow the following sequence:

1. Raise rear of vehicle and support with jack stands under lifting points. NEVER WORK UNDER A

VEHICLE SUPPORTED ONLY WITH A JACK.

2. Remove factory sway bar: Spray WD40 (or equivalent) on ball joint stud at sway bar end links. Use 17mm

wrench to remove end link lock nut.

NEUSPEED • 3300 Corte Malpaso • Camarillo, CA 93012 • 805.388.7171 • 805.388.0030 FAX

Visit us on the web…http://www.neuspeed.com & http://www.apsoutlet.com

1 2

Pagina 1

19mm ADJUSTABLE REAR SWAY BAR 1996 – 2001 AUDI A4 / S4 QUATTRO PART # 25.02.19.4 INSTALLATION INSTRUCTIONS PART LIST: 1 – SWAY BAR 1 – RIGH

Left hand (driver’s) side shown. Some OE components have been removed for clarity. 3. To remove sway bar, drop passenger side down first and slid

Sin comentarios

Neuspeed 25.02.19.4 Manual de usuario